Preferred Partner: American Hydrotech
Innovative Solutions
Viotell promotes and delivers innovative and creative metal solutions. We strive to be at the forefront of metal construction.
Utah Partner
Today, Hydrotech’s flagship product remains Monolithic Membrane 6125, the original hot fluid-applied rubberized asphalt membrane for waterproofing and roofing applications. MM6125 contains a minimum 40% recycled content and is thick, seamless, easy to detail and bonds directly to the substrate. The product has been in the marketplace for 60 years, with an unsurpassed performance history.
MM6125 is a thermoplastic material – one component, 100% solids; no solvents means no on-site cure failures, no two part mixing and no VOC restrictions.
MM6125 conforms to all surface irregularities and bonds tenaciously to an acceptable substrate (i.e., concrete, steel, wood, etc.) restricting the lateral migration of water between the membrane and substrate.
MM6125 is completely monolithic, no seams!
MM6125 is typically installed at 215 mils thick in the fabric reinforced assembly. This is more than three times thicker than most other waterproofing membranes. Thickness is an important benefit in that MM6125 exhibits the ability to self-heal and better accommodate developing cracks in a concrete substrate.
MM6125 can be installed at temperatures as low as 0 °F (provided the substrate is clean, dry, free of snow and frost).
MM6125 detailing is simplified, with triple protection at all critical locations.
MM6125 can be installed in dead level applications. The membrane can withstand and perform in submersed water conditions and is fully warrantable, making MM6125 the perfect membrane for no slope decks, water features, pools and vegetated roofs.
MM6125 has a minimum 40% recycled content; validated by UL.
Reduced Components
HYDROTECH® Monolithic Membrane Is a single 100% solid component removing the risk of cure failures.
Better Adhesion
Conforms to irregular surfaces for a stronger and tighter seal between membrane and substrate.
Seamless
Completely seamless installation eliminates potential entryways for water.
Thickness
Three times thicker than most other waterproofing systems, increasing the self-healing properties of the material.
Low temperature installations
MM6125 can be installed at temperatures as low as 0 °F
Robust Detailing
Simplified detailing reduces errors while still providing triple protection at all critical locations.
Warranty
The membrane can withstand and perform in submersed water conditions while still being fully warrantable.
Sustainability
MM6125 has a minimum 40% recycled content; validated by UL.